The Fin pool, spa & hot tubs, Tulsa OK The Fin Get a quote

HOT TUB CHEMISTRY · LEARNING WITH THE FIN

FROG @ease.
Minerals, a little chlorine, and zero yo-yo.

Most hot tub chlorine behaves like a toddler on a sugar high: it spikes when you add it, crashes when people climb in, and you spend your evenings chasing it with a scoop. FROG @ease takes a calmer approach. A blue mineral cartridge and a silver SmartChlor cartridge float around your tub together, keeping the chlorine low and steady for weeks at a time.

This is the full lily-pad tour: what’s actually in those two cartridges, the different FROG formats, how to start it, how to keep it, how to read the special strips, and what to do when the water gets moody. Every number on this page comes from FROG’s own manuals, product pages, and EPA labels. If FROG didn’t print it, we didn’t either.

Ryan Musch of The Fin sitting on the edge of a resort pool in sunglasses and red swim trunks, feet in the water, marking up a stack of notes with an orange highlighter
By Ryan Musch Director of Liquid Affairs, The Fin POOL SCHOOL · FROG EDITION

What this story covers. The FROG® @ease® Sanitizing System by King Technology for residential hot tubs: the Floating System, @ease+, 2-in-1 Water Care, In-Line, and the brand-fit versions; how the minerals and SmartChlor® work together; start-up, dial settings, cartridge replacement, test strips, shocking, water balance, draining, troubleshooting, and pros and cons. No prices. Your product’s label and manual always win.

“Two cartridges. One calendar.
The frog does the rest.”

— Ryan Musch, The Fin · authored for this page

THE GENERAL EDUCATION · WHAT’S ACTUALLY IN THE FROG

Two cartridges. One very chill tub.

Every @ease setup, from the floater to the built-in versions, comes down to the same two-cartridge team. Here’s what the labels and safety sheets say, minus the marketing lily pads.

FROG @ease Floating Sanitizing System kit: the blue and silver floater, Jump Start packet, test strips, and box
What’s in the Floating System box: a Mineral Cartridge, a SmartChlor Cartridge, one Jump Start packet, and 30 @ease Test Strips. Official FROG product photo.
  • Blue cartridgeFROG Sanitizing Minerals. The label lists silver chloride (0.5%) as the active ingredient, and the safety sheet shows the rest is mostly calcium carbonate. EPA Reg. No. 53735-11. It lasts 4 months, or until your next drain and refill, whichever comes first.
  • Silver cartridgeSmartChlor. Not your everyday dichlor. The EPA label lists two chlorinated hydantoins (81.1% and 16.1%). EPA Reg. No. 53735-14. It lasts about 3–4 weeks in an average 400-gallon tub.
  • The targetSmartChlor holds 0.5–1.0 ppm free chlorine as long as your water is balanced. FROG says that’s up to 75% less than the 2.0 ppm minimum ANSI recommends for hot tubs.
  • Tub sizeFROG says @ease suits hot tubs of 150–600 gallons. Bigger tubs can use more than one floating system: two for up to 1,200 gallons, three for up to 1,800.
HOW IT WORKS

Chlorine that doesn’t yo-yo.

When you add regular dichlor, the chlorine level spikes, then drops once people get in. SmartChlor works differently. FROG says it builds up a reserve in the water that turns into free chlorine as it’s needed, sending out more when there’s demand and holding steady the rest of the time. You get the same low level from the day you drop it in until the cartridge runs dry.

THE FIN TAKEThink of it as cruise control for chlorine. You still steer (that’s your water balance), but you stop flooring the gas and slamming the brakes.

THE PLOT TWIST

The frog needs both legs.

That low chlorine level only works because of the minerals. FROG says it plainly: SmartChlor “won’t work properly by itself,” and without the minerals, it “will not be enough to sanitize the hot tub.” So the blue cartridge isn’t optional. And since it looks the same on day 1 and day 120, it lives on the calendar, not on your gut feeling.

THE FIN TAKEForget the blue one and your chlorine cruise control is running on fumes. Write the mineral swap date on the box with a Sharpie.

PLAYS WELL WITH

Easy moves, per FROG.

  • Switching from dichlor: no drain needed, as long as cyanuric acid is below 80 ppm.
  • Non-chlorine shock: FROG Maintain, its single-dose monopersulfate shock, is the one the manual calls for.
  • Your filter: clean or replace dirty cartridges per your hot tub manufacturer, and run filtration the way they recommend.
  • Swim spas: there’s a separate @ease for Swim Spas that FROG rates at about 3–4 weeks per SmartChlor cartridge in an average 2,000-gallon swim spa.
DEFINITELY DO NOT

The “nope, not on my lily pad” list.

  • Bromine or biguanide water. Drain and refill before you start @ease.
  • Cyanuric acid over 80 ppm. Drain and refill first. FROG’s balance chart wants it at 0–50 ppm.
  • Dichlor for routine shocking. The manual says it builds up cyanuric acid, which hurts SmartChlor’s performance.
  • Regular test strips. They misread SmartChlor’s reserve as chlorine. Use the @ease strips (more in Testing).
  • Mixing SmartChlor with anything. Strong oxidizer. See the safety box above.

THE SUPPORTING CAST · SAME FROG, DIFFERENT LILY PADS

Meet the family. Pick your pad.

The chemistry is the same across the @ease family. What changes is where the cartridges sit and how you set the dials. The right one depends on how your hot tub is built, so bring us your make and model before you buy anything.

FROG @ease floating system: blue mineral top and silver SmartChlor bottom

Floating System

THE CLASSIC FLOATER

Blue on top, silver on the bottom. It floats at a slight tilt while it’s working and flips completely over when the SmartChlor runs out. @ease+ is the same thing bundled with four SmartChlor+ cartridges that have 10% more SmartChlor.

FROG @ease 2-in-1 Water Care System box

2-in-1 Water Care

FLOATING HOLDER

A floating holder you clip both cartridges into one at a time. Its dial chart is different from the classic floater’s (see Start-up). It uses its own SmartChlor refills.

FROG @ease In-Line Sanitizing System box

In-Line System

BUILT INTO THE TUB

For hot tubs with a FROG In-Line holder already plumbed in. Open the cap (never with the jets on), snap in the cartridges, and lock it back down. FROG says to lube the O-ring with silicone twice a year.

FROG @ease Sanitizing System for Jacuzzi Hot Tubs box

Brand-fit versions

MADE TO FIT

FROG makes @ease systems that fit select Jacuzzi® filters, Sundance® Spas filter systems, and certain Bullfrog Spas models, each with its own cartridges and dial chart. There’s also an @ease for Floating Weir.

FROG @ease SmartChlor Cartridge 3 Pack box

SmartChlor 3 Pack

REFILLS

Three replacement SmartChlor cartridges. Each version (floating, 2-in-1, In-Line, Jacuzzi, Sundance, Bullfrog, swim spa) has its own refills, so match the box to your system.

FROG @ease Test Strips bottle, yellow label

@ease Test Strips

YOUR EYES

The yellow bottle. They check pH, total alkalinity, total hardness, and whether your SmartChlor is spent. FROG says they’re for @ease systems only.

FROG Jump Start start-up shock packet

FROG Jump Start®

START-UP SHOCK

A single-dose dichlor packet that gives a fresh fill its first chlorine. One packet per 600 gallons, with one included in each @ease kit. It’s for start-up only, not your monthly shock.

FROG Maintain non-chlorine shock packet

FROG Maintain®

MONTHLY SHOCK

A single-dose, non-chlorine (monopersulfate) shock with no cyanuric acid. One packet per 600 gallons, and you’re soak-ready in 15 minutes.

Product photos are official FROG images from frogproducts.com. FROG®, @ease®, SmartChlor®, Jump Start®, and Maintain® are trademarks of King Technology, Inc. Jacuzzi®, Sundance®, and Bullfrog Spas are trademarks of their respective owners. FROG’s site doesn’t list a fitted version for American Whirlpool or Generation Spas. Stop by with your model and we’ll sort out the right format together.

START-UP · BALANCE, SHOCK, FLOAT

Start it right. Balance, shock, then float.

FROG’s start-up always goes in the same order. Before you start, the manual asks you to have your dealer test your source water. If it’s high in calcium, iron, or other metals, you may need a metal control product. That part is our job. Bring us a sample of your fill water.

TOTAL ALKALINITY80–120 ppm
pH7.2–7.6
TOTAL HARDNESS150–250 ppm

These are FROG’s @ease manual ranges. The same chart lists total dissolved solids under 1,500 and cyanuric acid at 0–50 ppm. Adjust in this order: alkalinity, then pH, then hardness. Add balancers in small amounts, one at a time, with the jets on, and wait 2 hours before you retest.

FRESH FILL · FLOATING SYSTEM

Start-up, step by step

  1. Prep: drain, clean, and refill with fresh water. Clean or replace dirty filter cartridges.
  2. Balance to the ranges above using the @ease strips. If your fill water is soft, FROG says you may need a hardness increaser to reach 150–250 ppm.
  3. Shock: with the jets running, pour in one FROG Jump Start packet per 600 gallons to establish 0.5–1.0 ppm free chlorine. Leave the cover open and run the jets 15–20 minutes.
  4. Heat to your hot tub manufacturer’s recommended temperature.
  5. Assemble: unwrap the SmartChlor cartridge, line up the arrows on both cartridges, then push and lock them together.
  6. Dial: twist the SmartChlor dial to the setting for your gallons (chart below).
  7. Float: toss it in. A slight tilt is normal.

THE FIN TAKEIf balancing drags on for more than 2 days, the manual says to shock with Jump Start and keep chlorine in the water while you finish. Don’t let a half-balanced tub sit unprotected.

SWITCHING FROM ANOTHER SYSTEM

Conversions, the honest version

  • From dichlor: you can switch without draining if cyanuric acid is under 80 ppm. Over 80 means drain and refill.
  • From bromine: drain and refill first. No exceptions.
  • From biguanides: also drain and refill first.
  • Starting a new mineral cartridge: FROG says every start-up begins with a fresh one.

THE FIN TAKENot sure what your last owner (or last weekend) put in that tub? Bring us a water sample before you start. A cyanuric acid test takes us a minute. Draining for no reason takes you an afternoon.

Floating System & @ease+ dial

Hot tub gallonsSmartChlor setting
200–2991
300–4502
451–5503
551–6004

From the FROG @ease and @ease+ Floating System manual.

2-in-1 Water Care dial

Hot tub gallonsSmartChlor setting
200–3503
350–4504
450–6005

From the 2-in-1 Water Care manual. Set its blue Mineral Cartridge to #7 and leave it there. The Jacuzzi version uses 4, 5, and 6 for the same gallon bands (mineral at #7). Sundance and Bullfrog versions have charts in their own manuals.

MAINTENANCE · A CALENDAR EVEN A FROG COULD KEEP

The routine. Short list, long soaks.

This is where @ease earns its name. There’s no daily chlorine math. What’s left is a handful of dates and one weekly dip of a strip.

THE CALENDAR

What happens when

  • At least weekly: test with @ease strips and keep total alkalinity and pH in range. FROG says SmartChlor may not work as well when the water isn’t balanced.
  • About every 3–4 weeks: swap the SmartChlor cartridge when the floater flips completely over, or when the strip’s top pad comes up lighter than the bottle label.
  • Monthly, or at every SmartChlor swap: shock with FROG Maintain. Add an extra dose after a hot tub party.
  • Every 4 months: replace the mineral cartridge, even if you can still hear minerals rattling inside.
  • Every 3–4 months: FROG’s knowledge center says to purge, drain, and refill, and the manual says to follow your hot tub manufacturer too. Every refill gets a fresh mineral cartridge.
  • Monthly: clean the filter, per FROG’s foam-prevention tips.
HOW TO SHOCK · FROG MAINTAIN

Shock day, the FROG way

  1. Check the pH first and bring it to 7.2–7.6.
  2. With the jets running, cut open one packet (one dose per 600 gallons) and pour it right into the water.
  3. Run the jets on high for 15 minutes.
  4. Wait 15 minutes after adding it before anyone gets back in.

THE FIN TAKEHere’s the twist: Jump Start is dichlor, and it’s perfect for a fresh fill. For your monthly shock, though, the manual says no dichlor, because the cyanuric acid it leaves behind slows SmartChlor down. Start-up gets the chlorine packet. Every month after that gets the non-chlorine one.

SWAPPING SMARTCHLOR · FLOATING SYSTEM

When the frog flips

  1. Not sure it flipped? FROG says it naturally tilts. Lift it out, let all the water drain, put it back, and see if it rolls all the way over.
  2. Twist the cartridges to line up with the “unlock” arrow and pull them apart.
  3. Attach a new SmartChlor cartridge, reset the dial, and float it.
  4. Still a little SmartChlor left in the old one? Float it by itself until it’s empty, then throw it away. Don’t let it sink.
  5. Running two floaters? Replace each one as soon as it flips. Don’t wait for both.
SOAK-TIME ETIQUETTE

Can the frog stay in?

Yes. FROG says you can leave it floating, or you can lift it out while you soak, let it drain back into the tub, and set it on a surface chlorine can’t bleach. The floating manual adds: take it out while you’re using the tub with the jets running. If it keeps getting pulled into the skimmer or filter well, tether it to the side, away from the jets. Getting sucked in burns through SmartChlor faster.

THE FIN TAKEA tether is a cheap way to make your cartridges last longer. Just remember to put the frog back after your soak.

TESTING · THE YELLOW BOTTLE, NOT THE WHITE ONE

Read the strip. Not your neighbor’s strip.

This trips up more FROG owners than anything else. SmartChlor forms a chlorine reserve that ordinary strips read as total chlorine, so a regular strip can make a perfectly healthy tub look over-chlorinated. The @ease strips skip the chlorine pads entirely. Instead, they have a simple “out” indicator that tells you when the SmartChlor cartridge is empty.

HOW TO DIP · PER THE BOTTLE

Two seconds, one comparison

  1. Dip the strip in the water for 2 seconds.
  2. Pull it out with the pads facing up and give it a shake.
  3. Hold it next to the color chart on the bottle.
  4. Top pad darker than the label? You’re good. Lighter? Check the SmartChlor cartridge and replace it if it’s empty.
  5. Read pH, total alkalinity, and total hardness, then adjust in that classic order: alkalinity, pH, hardness.
STRIP SMARTS

Yellow bottle for @ease.

  • @ease Test Strips (yellow bottle): pH, total alkalinity, total hardness, and the SmartChlor “out” indicator. For @ease only.
  • FROG Test Strips (white bottle): these read free chlorine or bromine and are meant for other FROG systems, like FROG Serene. FROG’s own support team points out it’s an easy mix-up.
  • Keep pH under 7.6. FROG says balanced water makes your SmartChlor cartridge last longer.

THE FIN TAKEStrips are a quick check, not a lab. If your strips and your gut disagree, bring us a sample and we’ll run a full test. We’ll know what to look for with a FROG tub.

TROUBLESHOOTING · WHEN THE POND GETS MOODY

Something’s off? Check these first.

FROG’s own fixes nearly always start in the same place: balance, cartridges, and the calendar. Here they are, condensed.

CLOUDY WATER

Foggy pond

  1. Rebalance: TA 80–120, pH 7.2–7.6, hardness 150–250.
  2. Shock with FROG Maintain, a non-chlorine shock. No dichlor.
  3. Shake the SmartChlor cartridge. If it’s silent, replace it.
  4. Mineral cartridge older than 4 months? Replace it.
  5. Clean the filter, and replace it if it’s worn.
  6. Run circulation for 24 hours. Still cloudy? Purge, drain, and refill.
LOW SMARTCHLOR READING

Strip looks pale

First, take the cartridge out, drain it, and shake it. Hear nothing? It’s empty, so replace it. Not empty? Turn the dial up one number, check your balance, and turn it up once more if you still need to. Then check your mineral cartridge’s date, because FROG says SmartChlor alone isn’t enough to sanitize.

“HIGH CHLORINE”

Probably a strip problem

FROG says over-chlorinating with SmartChlor is highly unlikely because it regulates itself. If a standard strip shows total chlorine way above free chlorine, it’s reading the SmartChlor reserve. Switch to @ease strips. If you really think the setting is too high, turn the dial down one number while you keep the water balanced.

FOAM

Bubble bath you didn’t order

FROG blames body oils, lotions, detergent, soap, or bad balance. Rebalance, use a defoamer for quick relief (it’s a bandage, not a cure), shock with FROG Maintain, and clean the filter. Prevent it by rinsing off before you soak and rinsing swimsuits in plain water. If it keeps coming back, purge, drain, and refill.

GREEN OR DISCOLORED

Not the good kind of green

FROG lists metals (copper, iron, manganese), unbalanced water, algae, and biofilm in the plumbing. If the color showed up right after a refill or a shock, suspect metals. A metal sequestrant helps, and so does testing your source water. For algae, clean the surfaces and filter and shock. Then check both cartridges, and purge, drain, and refill if it won’t go away.

SHORT CARTRIDGE LIFE

The frog’s hopping too fast

The usual suspects, per FROG: pH running above 7.6, the floater getting pulled into the filter well (tether it), a tub over 400 gallons with a lot of bathers (which may need a higher setting and shorter cartridge life), or leaving it in while the jets are running.

WHY PEOPLE LIKE IT

Set it, float it, mostly forget it.

  • Steady 0.5–1.0 ppm chlorine instead of spikes and crashes.
  • Pre-filled cartridges, so there’s no scooping, measuring, or chlorine dust.
  • FROG says you only need to shock about once a month, compared with weekly on most systems.
  • FROG says the water is softer, with less chlorine smell and fewer faded swimsuits.
  • The floater flips to tell you when it’s empty. Very polite frog.
WHAT TO KNOW GOING IN

The frog has rules.

  • You have to use the @ease strips. Regular strips will mislead you.
  • The mineral cartridge runs on a 4-month calendar, not on how it looks or sounds.
  • No dichlor shock for routine maintenance, and coming from bromine or biguanide means a full drain first.
  • FROG admits SmartChlor costs a little more than dichlor, and you’re buying refills for your specific format.
  • It only works if the water is balanced. Low effort doesn’t mean no effort.

KEEP LEARNING

More from Pool School.

THE HOMEWORK, WITHOUT THE POP QUIZ

Sources that kept us honest.

This is Pool School education, not the product label and not a price list. Every range, interval, and dial setting above comes from FROG’s own materials and the EPA-accepted label.

Manufacturer sources checked November 11, 2026 (America/Chicago). Product photos are official FROG images from frogproducts.com. Ryan portrait supplied by The Fin. Pull quote authored for this page. No prices or retailer claims included. FROG customer service (per frogproducts.com): 800-222-0169, weekdays 8–5 CT. FROG, @ease, SmartChlor, Jump Start, Maintain, and Serene are trademarks of King Technology, Inc. Jacuzzi, Sundance, and Bullfrog Spas are trademarks of their respective owners.

Not sure where your pH, alkalinity, or hardness stands, or which FROG fits your tub?

Stop by The Fin. We’ll test your water.