The Fin pool, spa & hot tubs, Tulsa OK The Fin Get a quote

ABOVE-GROUND POOLS · LEARNING WITH THE FIN

How many gallons is my pool? Let’s count.

Every chemical label, every bag of salt and every “add 1 pound per 10,000 gallons” starts with one number: how much water you have. Most people guess. Guessing is how a pool ends up cloudy, green or smelling like a public locker room. So here’s my gallon chart for round and oval above-ground pools, a calculator for everything else, and why the number matters more than you think.

  • 📏 Measure it
  • 📊 Look it up
  • 🧮 Or calculate it
  • 🧪 Dose it right
Ryan Musch of The Fin in sunglasses, a blue T-shirt and khakis, lounging at the top of a tall yellow lifeguard chair, owner of The Fin in Tulsa
By Ryan Musch Director of Liquid Affairs, The Fin Chief gallon counter 🪣

“If you don’t know your gallons, every dose is a guess. And the pool always knows when you guessed.”

Ryan, Director of Liquid Affairs

① MEASURE YOUR POOL

Grab a tape measure. And a helper.

To use the chart, you need three things: your pool’s shape, its size and its wall height.

  1. Shape and size. Round pools go by diameter: measure straight across the middle, wall to wall. Oval pools go by width × length: measure across the short way, then the long way. Pools are sold by their nominal size (a “24-foot round”), so pick the closest size on the chart.
  2. Wall height. Measure the wall from the ground to the top rail. Above-ground walls usually come in 48″, 50″, 52″ or 54″.
  3. A hopper? A hopper is a “deep end” dug out in the middle of the pool, with an expandable liner. If you have one, use the hopper row. It holds more water. Every hopper is dug a little differently, so those rows are my best estimate.

About the water line: my chart figures the water about 6″ below the top rail, which is about where your water should sit. So a 48″ wall holds about 42″ of water, not 48″.

A round above-ground pool with a white marbled wall and dark uprights on a lawn, in front of a brick garden wall
Round or oval, the wall height counts. A few extra inches of wall adds hundreds of gallons. Image: Doughboy Pools.
48″ wallabout 42″ of water
50″ wallabout 44″ of water
52″ wallabout 46″ of water
54″ wallabout 48″ of water

② RYAN’S GALLON CHART

Find your pool. Read across.

Find your size on the left, then read across to your wall height. Numbers are in gallons, with the water about 6″ below the top rail. On a phone, swipe the chart sideways if you need to.

Round pools GALLONS

Ryan’s gallon chart: round above-ground pools
Pool sizeAreasq ft48″wall50″wall52″wall54″wall
10’792,0502,1502,2502,350
12’1132,9503,1003,2503,400
15’1774,6504,8505,1005,300
16’2015,3005,5505,8006,050
18’2546,7007,0007,3507,650
19’2847,4507,8008,1508,500
21’3469,1009,5509,95010,400
22’38010,00010,45010,95011,400
24’45211,90012,45013,05013,600
24’HOPPER · EST.45213,85014,40015,00015,550
25’49112,90013,50014,15014,750
25’HOPPER · EST.49115,05015,70016,30016,900
27’57315,05015,75016,50017,200
27’HOPPER · EST.57317,65018,35019,10019,800
28’61616,20016,95017,75018,500
28’HOPPER · EST.61619,00019,80020,55021,300
30’70718,60019,45020,35021,250
30’HOPPER · EST.70721,90022,80023,65024,550

Round: diameter × diameter × water depth (ft) × 5.9. Water depth is the wall height minus 6″. Gallons are rounded to the nearest 50. Area is the true surface area in square feet.

Hopper rows are estimates. A hopper is a “deep end” dug out in the middle, with an expandable liner. I figured a bowl about 2½ ft deeper in the center (about 6 to 6½ ft of water there), with a 2 ft flat ledge around the edge. Hopper depths vary, so for the best number, use the calculator with your average depth.

Oval pools GALLONS

Ryan’s gallon chart: oval above-ground pools
Pool sizeAreasq ft48″wall50″wall52″wall54″wall
10’ × 16’1393,6503,8003,9504,150
12’ × 18’1854,8505,1005,3005,550
12’ × 21’2215,8006,0506,3506,600
12’ × 24’2576,7507,0507,3507,700
15’ × 24’3128,1508,5508,9509,350
15’ × 30’40210,50011,00011,50012,000
16’ × 24’3298,6009,0509,4509,850
16’ × 30’42511,15011,65012,20012,700
16’ × 32’45711,95012,55013,10013,700
18’ × 27’41610,90011,40011,95012,450
18’ × 33’52413,75014,40015,05015,700
18’ × 38’61416,10016,85017,60018,400
18’ × 45’74019,40020,30021,25022,150
21’ × 41’76620,05021,00021,95022,950

Oval: true oval shape: a rectangle in the middle with a half circle on each end. Area (sq ft) × water depth (ft) × 7.48. Flat-bottom pools. Your pool may hold a little more or less, depending on the exact size and where you keep the water.

③ GALLONS CALCULATOR

Not on the chart? Do the math.

Odd size, a custom water level or just curious? Plug in your numbers. The calculator uses the same formulas as my chart, so if your size is on the chart, you’ll get the same number.

ABOUT 13,050gallons

Water depth tip: use your wall height minus about 6″ (a 52″ wall is about 46″ of water). Have a hopper? Tick the box to add my hopper estimate, or leave it off and enter your average depth across the pool.

THE MATH, IF YOU LIKE MATH

diameter × diameter×water depth (ft)×5.9=round gallons

oval area (sq ft)×water depth (ft)×7.48=oval gallons

These are the standard pool volume formulas (source: PoolSupplies.com). There are about 7.48 gallons in a cubic foot of water, and 5.9 is 7.48 × 0.785, the part of a square a circle fills. An above-ground oval is a rectangle with a half circle on each end, so oval area = width × (length − width) + 0.785 × width × width. (You’ll see a length × width × 6.7 shortcut online. It only fits a pool twice as long as it is wide.) Water depth is in feet: divide inches by 12.

Example: a 24′ round with a 52″ wall holds about 46″ (3.83 ft) of water. 24 × 24 × 3.83 × 5.9 ≈ 13,050 gallons. That’s exactly what my chart says.

④ WHY GALLONS MATTER

The number behind every scoop.

Chemical labels are written per gallon, usually per 10,000 gallons. If you guess 18,000 and your pool really holds 13,050, you’re overdosing by nearly 40%. Guess low, and nothing seems to work. Here’s where your number does the heavy lifting.

Chemicals

Chlorine, shock, pH up and down, alkalinity and calcium are all dosed by gallons. The right number means the right dose the first time, and less money poured in for nothing.

Salt

Running a salt system? A fresh fill needs a lot of salt. As a rule of thumb, about 50 lb of salt per 2,000 gallons raises the salt level by about 3,000 ppm. For a 24′ round at 52″ (13,050 gallons), that’s about 325 lb. Check your salt system’s manual for its target.

Stabilizer (CYA)

About 1 lb of cyanuric acid per 5,000 gallons raises CYA by roughly 24 ppm. That same 13,050-gallon pool needs about 3¼ lb to go from zero to about 30 ppm. Add it slowly, because the only way to lower CYA is to drain some water.

Pump & filter

Your pump and filter are sized to move your pool’s water through the filter. My rule: run the pump a minimum of 16 hours a day in swim season. A filter can’t clean water that isn’t moving.

Opening & closing

Winterizing chemicals, start-up doses and algaecides are all measured by gallons, too. Know your number before the season starts, not halfway through.

Write it down

Once you know your gallons, write it on the inside of your chemical cabinet, in your phone, or anywhere you’ll see it when you dose. Then bring it with your water sample.

Your targets, same as every page.

FREE CHLORINE

2–4 ppm

The germ killer. Test it often in the summer.

pH

7.2–7.6

Comfortable for swimmers and lets your chlorine do its job.

TOTAL ALKALINITY

80–120 ppm

pH’s shock absorber. It keeps pH from bouncing around.

CALCIUM HARDNESS

200–400 ppm

Too low is hard on your pool. Too high leaves scale.

CYA (STABILIZER)

30–50 ppm

Sunscreen for your chlorine. Saltwater pool? Aim for 60–80 ppm.

PUMP RUN TIME

16+ hours a day

My recommendation for swim season, at a minimum.

⑤ FILLING TIPS FOR TULSA

Filling up? Bring a lawn chair.

A round above-ground pool with a gray wood-look wall, full of blue water, in a fenced backyard
Thousands of gallons, one hose at a time. Image: Embassy Pools.
  1. Read your water meter first. Write down the reading before you start and after you finish. The difference is your real fill volume, which beats any chart. Check your water bill for the meter’s units.
  2. Plan for a long fill. One garden hose can take a day or more to fill a mid-size pool. Hose flow varies a lot with your water pressure, so time a 5-gallon bucket to get your own gallons-per-minute, then divide your pool’s gallons by it.
  3. Stay nearby. Set a timer and check it often. An overflowing pool wastes water and can wash out the ground around it.
  4. Stop at the right level. Fill to about the middle of the skimmer opening, about 6″ below the top rail. That’s the level my chart uses.
  5. Know what’s in Tulsa’s water. The City of Tulsa adds chloramine to its drinking water. It’s more stable than chlorine and doesn’t just gas off, so test your fresh water before you add anything, or bring a sample to us.
  6. Never drain it all the way. If you ever lower the water, Doughboy’s instructions say to leave at least 12″ of water in the pool, and never leave the pool without a liner.

Fresh fill? Ask Ryan. Once the pool is full and the pump has run for a day, text me your gallons or book an appointment, and we’ll go over the right doses for your pool.

KEEP LEARNING

More from Pool School.

⑥ BOOK OR TEXT RYAN

Bring your gallons. We’ll bring the answers.

Text me your pool size from the chart, and I’ll help you dose it right. Not sure of your size or wall height? Text me a photo of the pool and I’ll help you figure it out. Want us to handle openings, closings or regular care? Schedule an appointment, and we’ll take it from there.

Book an appointment 🐬

Photo of Ryan provided by The Fin. Pool images courtesy of Doughboy Pools and Embassy Pools. Stock photo via Unsplash: João Pedro Schmitz. Gallon chart by The Fin, calculated with standard pool volume formulas. Full credits and sources in CREDITS.txt.