Some pools are just done with chlorine: the smell, the red eyes, the swimsuits that fade by July. Biguanide is the clean break. It’s a chlorine-free liquid sanitizer (chemists call it PHMB) that teams up with a hydrogen peroxide oxidizer to keep the water soft, clear, and drama-free. The catch? It’s a jealous ex. Chlorine and biguanide do not get along, ever.
This is the whole relationship talk: what biguanide actually is, why swimmers fall for it, the honest red flags, and how the two systems we’re featuring, Pool Elegance and BAQUACIL, run day to day. Every dose and range on this page comes from the manufacturers’ own labels, guides, and EPA-accepted labeling. If they didn’t print it, we didn’t either.
By Ryan Musch
Director of Liquid Affairs, The Fin
POOL SCHOOL · BIGUANIDE EDITION
What this story covers. Biguanide (PHMB) chlorine-free sanitizing for swimming pools, featuring the Pool Elegance® system by N. Jonas & Co. and the BAQUACIL® CDX® System: how it works, pros and cons, each brand’s products and doses, converting from chlorine, weekly care, water balance, troubleshooting, and the do-not-mix list. No prices. Your product’s label always wins.
“No chlorine. No smell. No drama. Just never introduce them.”
— Ryan Musch, The Fin · authored for this page
THE GENERAL EDUCATION · WHAT’S IN THE JUG
Same molecule, two different outfits.
Pool Elegance Sanitizer and BAQUACIL Swimming Pool Sanitizer and Algistat have the same active ingredient at the same strength. What changes is the brand’s system around it: the oxidizer, the support products, and the routine.
Active ingredientPolyhexamethylene biguanide hydrochloride (PHMB), 20%. Same on both EPA labels: Pool Elegance Sanitizer is EPA Reg. No. 3432-83 and BAQUACIL Sanitizer and Algistat is EPA Reg. No. 1258-1263. Both carry the WARNING signal word.
Its jobA sanitizer and algistat, per both labels. It controls bacteria and helps hold off algae. The Pool Elegance label adds that it’s registered as a sanitizer, “not a disinfectant.”
The targetAbout 50 ppm on both. BAQUACIL’s Care Guide wants 40–50 ppm and never under 40. Pool Elegance’s label says never let it drop below 30 ppm.
Staying powerBAQUACIL says its sanitizer isn’t affected by sunlight or heat, so it won’t burn off in summer, and one application controls bacteria for as long as 10–14 days.
HOW IT WORKS
A three-piece band, not a solo act.
Biguanide systems split up the jobs chlorine usually does alone. The sanitizer handles bacteria and algae control. A hydrogen peroxide oxidizer clears out swimmer waste and other gunk. BAQUACIL’s Oxidizer “clarifies pool water by removing swimmer waste and other pool contaminants,” and Pool Elegance calls its version Shock. A third helper rounds it out: BAQUACIL’s CDX keeps the oxidizer working longer, and algaecides come in where algae is a problem.
THE FIN TAKEChlorine is a one-man band. Biguanide is a trio. It sounds great, but everybody has to show up to rehearsal.
THE PLOT TWIST
The oxidizer is the secret sauce.
BAQUACIL says it plainly: “Maintaining an oxidizer residual is key to keeping water clear all summer long.” That’s why its strips have an oxidizer pad. That pad gives you an early warning that gunk may be building in the filter or plumbing before the water turns cloudy. If the oxidizer reads zero two weeks in a row, BAQUACIL says your filter probably needs a chemical cleaning.
THE FIN TAKEWith biguanide, your filter isn’t a side character. It’s the co-star. Treat it that way.
THE HONEST PART · GREEN FLAGS AND RED FLAGS
Why people fall for it. Why some break up.
Biguanide pool owners tend to be loyal. Still, it’s a relationship with rules, and it’s only fair to tell you about them before the first date.
GREEN FLAGS
Soft water, zero chlorine smell.
Gentle on people: BAQUACIL says it’s gentle and non-irritating to eyes, skin, and hair. Pool Elegance promises no odor, no eye burn, and no dry or irritated skin.
Gentle on stuff: easy on swimsuits and pool liners (BAQUACIL), with no bleaching of bathing suits (Pool Elegance).
Sun-proof: BAQUACIL says it won’t burn off in summer heat and sun, unlike chlorine, which swings up and down all day.
Any pool: in-ground, above-ground, fiberglass, vinyl, or plaster, per BAQUACIL. Pool Elegance says it “works in any type pool.”
Quick switch: BAQUACIL says you can convert in as little as 24 hours without draining.
Liquid and weekly: pour, don’t scoop. Most of the work is a once-a-week routine.
Steadier than chlorine: BAQUACIL points out that chlorine levels “vary widely throughout the day and may require daily additions.” Biguanide just sits there being consistent.
RED FLAGS
It’s a commitment. A chemistry commitment.
Chlorine is off the table. No chlorine shock, no tablets, no salt cell. That includes the “emergency” jug in the garage.
Brand loyalty required. BAQUACIL labels its sanitizer, oxidizer, CDX, strips, and Metal Control “Compatible with BAQUACIL pools only.”
Pink slime and white water mold. BAQUACIL makes CDX specifically to help prevent them, and it has a whole reference sheet for treating water mold.
Filter homework. Chemically clean the filter at least twice a season (three times for a long season). Replace sand that’s more than two years old if the oxidizer won’t hold.
Algae can still crash the party. BAQUACIL recommends a preventive algaecide in hot climates or pools with a history of algae. (Oklahoma summers: raising our hand.)
Small quirks: the water may go hazy for 24–48 hours after you add sanitizer, and a heavier waterline ring is common in the first few weeks.
Cleaner check: many detergents and some algaecides don’t play nice. Ask us first.
MEET THE SYSTEMS · NO. 1
Pool Elegance. The lotus-flower lineup.
Pool Elegance is N. Jonas & Co.’s biguanide line out of Bensalem, Pennsylvania, sold as “a completely non-chlorine sanitizing system.” The sanitizer’s EPA label lays out the doses, and the lineup comes from N. Jonas’s official sell sheet.
The Pool Elegance family: Shock, Filter Cleaner, Stain & Scale Preventer, Sanitizer, and Algaecide. Photo from the official N. Jonas sell sheet.
Start-upBackwash or clean the filter. Adjust pH to 7.0–7.8. Add Sanitizer to reach 50 ppm, which is ½ gallon per 10,000 gallons. After 24 hours, check pH and sanitizer with the Pool Elegance test kit and adjust.
Every weekCheck sanitizer and pH. Keep sanitizer at about 50 ppm. When it falls 10 ppm or more, add a top-up dose.
Top-up math1 pint per 10,000 gallons raises the level about 10 ppm, per the label.
The floorNever let it drop below 30 ppm.
Hazy or green?The label sends you to the Pool Elegance owner’s guide and your dealer for problem-solving. (Hi. Text Ryan.)
SANITIZER
The main act
Chlorine-free swimming pool sanitizer and algistat. PHMB 20%, labeled WARNING.
SHOCK
The oxidizer
Hydrogen peroxide, labeled DANGER (oxidizer, corrosive). The bottle says “Do not use with chlorine or bromine treated pools.”
ALGAECIDE
The bouncer
The bottle says it works against green, black, and mustard algae, with no foaming and no staining.
SUPPORT CREW
Filter & surface
Filter Cleaner for the filter, and Stain & Scale Preventer (a tetrasodium EDTA product, per its bottle).
MEET THE SYSTEMS · NO. 2
BAQUACIL CDX. Three steps, once a week.
BAQUACIL calls the CDX System “a simple, weekly, 3-step, 3-product, chlorine free system.” You can buy the three steps one at a time or in a kit with a 96 oz. Sanitizer & Algistat, two 96 oz. Oxidizers, a 96 oz. CDX, 4-Way Test Strips, and start-up instructions.
The BAQUACIL CDX System Kit. Official BAQUACIL product photo.
Step 1 · SanitizeSwimming Pool Sanitizer and Algistat. Check weekly. Keep it at 40–50 ppm, and when it hits 40 or less, bring it back to 50. Heavy rain can dilute it.
Step 2 · OxidizeOxidizer (stabilized hydrogen peroxide). Add it weekly in front of the skimmer: 1 quart per 10,000 gallons.
Step 3 · MaintainCDX. Add it weekly into the skimmer with the pump running: 1 pint per 10,000 gallons. Always add it immediately after the Oxidizer.
ThenWait 15 minutes before swimming so the CDX is fully dispersed.
Sanitizer & Algistat
STEP 1
The chlorine-free liquid sanitizer. BAQUACIL says it has a long shelf life and is highly stable in water.
Oxidizer
STEP 2
Specially stabilized hydrogen peroxide (27.5% per the EPA label) that removes swimmer waste. Store it upright.
CDX®
STEP 3
Keeps the oxidizer working longer. BAQUACIL says it helps prevent pink slime and white water mold.
4-Way Test Strips
YOUR EYES
Read pH, total alkalinity, sanitizer, and oxidizer in 15 seconds. BAQUACIL says to test twice a week in summer.
Universal Filter Cleaner
FILTER SPA DAY
Dissolves debris, scale, oils, and organic waste. Use it at least twice a season.
Metal Control
STAIN STOPPER
A chelating agent for copper, iron, and other metals. Required on every plaster pool at 1 bottle per 10,000 gallons.
Algicide
ALGAE BACKUP
A low-dose liquid algaecide. Also in the family: Performance Algicide, a non-foaming option.
AlgiDefense®
MUSTARD GUARD
A monthly application that controls mustard algae in BAQUACIL-treated pools.
BAQUACIL start-up doses (fresh fill or conversion)
Pool gallons
Sanitizer & Algistat (to 50 ppm)
Oxidizer
CDX
5,000
2 pints
½ gal
1 pint
10,000
4 pints
1 gal
1 pint
15,000
6 pints
1½ gal
2 pints
20,000
8 pints
2 gal
2 pints
25,000
10 pints
2½ gal
3 pints
30,000
12 pints
3 gal
3 pints
From the BAQUACIL CDX Pool Care Guide. The chart continues to 50,000 gallons: 20 pints, 5 gal, and 5 pints. Add the CDX right after the Oxidizer.
Product photos are official BAQUACIL images from baquacil.com and the official Pool Elegance sell sheet from njonas.com. BAQUACIL® and CDX® are trademarks of Innovative Water Care, LLC or its affiliates. Pool Elegance is a product line of N. Jonas & Co., Inc.
CONVERSIONS · BREAKING UP WITH CHLORINE, PROPERLY
Balance first. Then neutralize, then switch.
Every conversion starts with balanced water and zero chlorine. Here are BAQUACIL’s water balance targets. Bring us a sample and we’ll run it for you, since both brands want a full dealer analysis before you start.
pH7.2–7.8
TOTAL ALKALINITY80–150 ppm
CALCIUM HARDNESS180–250 ppm
The 180–250 ppm calcium hardness range is for vinyl and other non-plaster pools. BAQUACIL lists 200–275 ppm for plaster. Its guide also wants metals at 0 ppm and total dissolved solids under 2,000 ppm. Adjust total alkalinity before pH.
CHLORINE OR BROMINE → BAQUACIL CDX
The BAQUACIL way
Balance the water, then remove every chlorine or bromine source (sticks, tablets, floaters) and stop adding them.
Neutralize: add 1 gallon of BAQUACIL Oxidizer per 10,000 gallons and circulate 8–12 continuous hours. Confirm free chlorine is 0 with a DPD test (DPD #1 tablet).
Filter prep: BAQUACIL’s conversion page says to chemically clean cartridges or D.E. grids with Universal Filter Cleaner (or replace the cartridge) and to replace sand.
Metals: if your dealer finds metals, add Metal Control at 1 bottle (1¼ lb.) per 10,000 gallons for every 2 ppm, and circulate 8–12 hours.
Dose: Sanitizer & Algistat to 50 ppm, then the start-up Oxidizer, then the start-up CDX (chart above).
Go: begin the weekly routine.
THE FIN TAKEWater a little hazy the next day? BAQUACIL says that’s normal after adding sanitizer and should clear in 24–48 hours with continuous filtering. Don’t panic-shock it. (Seriously. Not with chlorine.)
CHLORINE → POOL ELEGANCE
The Pool Elegance way
Test free and combined chlorine with a chlorine test kit.
Neutralize: add a chlorine neutralizer per its label directions and filter overnight.
Retest. If you still see any free chlorine, repeat the neutralizer treatment.
Prep: backwash or clean the filter and adjust pH to 7.0–7.8.
Dose: Sanitizer to 50 ppm (½ gallon per 10,000 gallons).
Check: after 24 hours, test pH and sanitizer with the Pool Elegance test kit and adjust.
Keep it: every week, check sanitizer and pH. Hold it near 50 ppm, and never let it go below 30.
THE FIN TAKEAlgae or haze before you start? The label says to sort that out first with the owner’s guide and your dealer. Start clean, stay clean.
PLASTER POOLS
Metals are the enemy.
BAQUACIL requires Metal Control on every plaster pool at 1 bottle per 10,000 gallons, whatever the metal test says. Add it after the chlorine is neutralized and before the sanitizer. If the plaster already has metal stains, BAQUACIL says don’t convert until the surface is properly treated (acid washing, sandblasting, and so on). Pool Elegance’s label carries the same warning about unpainted plaster previously exposed to metals.
AND IF YOU WANT TO GO BACK?
Call us before you call chlorine.
Neither manufacturer publishes a do-it-yourself guide for switching a biguanide pool back to chlorine. Both labels say to talk to your authorized dealer about accidental chlorination. So whether you’re switching back on purpose or someone tossed in a chlorine tab by mistake, text Ryan before you add anything. We’ll walk you through it.
THE ROUTINE · ONE CUP OF COFFEE, ONCE A WEEK
The weekly ritual. Short, sweet, non-negotiable.
Here’s what a week looks like, using each brand’s published routine. The side-by-side chart below keeps the two brands straight.
Test. BAQUACIL owners: 4-Way strips (dip 2 seconds, don’t swish, read right away). Pool Elegance owners: the Pool Elegance test kit, for sanitizer and pH.
Balance. Adjust total alkalinity first, then pH.
Top up the sanitizer if it’s low: BAQUACIL at 40 ppm or under, Pool Elegance once it’s down 10 ppm or more. Bring it back to 50.
Oxidize. BAQUACIL: 1 quart of Oxidizer per 10,000 gallons in front of the skimmer, then immediately 1 pint of CDX into the skimmer with the pump running. Wait 15 minutes to swim.
Housekeeping. Brush and vacuum, empty the skimmer and pump baskets, wipe the waterline, and check filter pressure. If it’s high, backwash per your filter’s maker.
Run the pump 16 hours a day. That’s The Fin’s house advice in season, and more after heavy use or a big rain.
Once a month, bring us a water sample for a full analysis (BAQUACIL recommends it). Also bring one after heavy rain or a big top-off. Take it about 18 inches below the surface, away from the returns.
Twice a season, chemically clean the filter (three times for a long season).
Cheat sheet: Pool Elegance vs. BAQUACIL
Pool Elegance
BAQUACIL CDX
Sanitizer
Pool Elegance Sanitizer (PHMB 20%, EPA 3432-83)
Swimming Pool Sanitizer and Algistat (PHMB 20%, EPA 1258-1263)
Target
About 50 ppm. Top up when it’s down 10+ ppm.
40–50 ppm. Top up at 40 or less.
Never below
30 ppm (label)
40 ppm (Care Guide). The EPA label says 30.
Start-up dose
½ gal per 10,000 gal → 50 ppm
4 pints (½ gal) per 10,000 gal → 50 ppm
Raise 10 ppm
1 pint per 10,000 gal
Use the Care Guide’s top-up chart
Oxidizer
Pool Elegance Shock (hydrogen peroxide). Follow the label.
Oxidizer: 1 qt per 10,000 gal weekly
Step 3
Algaecide as needed. Follow the label.
CDX: 1 pint per 10,000 gal weekly, right after the Oxidizer
pH
7.0–7.8 at start-up
7.2–7.8
Testing
Pool Elegance test kit, weekly
4-Way strips. Twice a week in summer.
Pick one brand and stay in its lane. Each system’s directions are written for its own products.
TROUBLESHOOTING · WHEN THE WATER GETS MOODY
Don’t reach for chlorine. Reach for the filter.
These fixes come from BAQUACIL’s Care Guide and reference sheets. With Pool Elegance, the label sends you to its owner’s guide and your dealer, which is us. Most roads start at the filter.
CLOUDY / HAZE
Fog machine
Check the oxidizer pad. If there’s oxidizer, check balance and filter and use Flocculant as a filter aid. If it’s at zero: floc, then 1 gal Oxidizer per 10,000 gal, then 1 pint CDX, top sanitizer up to 50, and chemically clean the filter. Can’t see the floor? Broadcast floc, let it settle, and vacuum to waste first.
WATER MOLD / PINK SLIME
The uninvited guest
The mandatory first step is to chemically clean the filter or change the sand. Then floc, Line Clean (2 lb per 10,000 gal), and filter 24–48 hours. Bring sanitizer to 50 ppm plus start-up Oxidizer and CDX, then scrub the hiding spots: skimmers, pump baskets, under ladders, behind lights.
ALGAE
Green with envy
Balance the water, clean the filter, and brush. Add a BAQUACIL algaecide per its label. Top sanitizer up to 50 ppm, add 1 gal Oxidizer per 10,000 gal, then filter continuously. Got a heavy bloom? Floc and vacuum first.
OXIDIZER STUCK AT 0
Where’d it go?
The first week, add a start-up dose and top up the sanitizer. If it reads zero two weeks running, chemically clean the filter, or replace the sand if it’s over two years old.
FOAM · TASTE · EYES
Too much of a good thing
Over 50 ppm sanitizer can cause foam, a dry, bitter taste, or eye complaints, and too much algaecide tastes like almonds. Stop adding it until the strips say so. BAQUACIL says the level drops about 3–4 ppm a day on its own.
WATERLINE RING
Bathtub ring, pool edition
A slightly heavier ring is normal, especially in the first few weeks after converting. Wipe the waterline as needed and move on with your life.
QUICK FAQ · THE STUFF PEOPLE TEXT ME
Fast answers. No pop quiz.
REGULAR SHOCK?
Nope.
Chlorine shock is chlorine. Use your system’s hydrogen peroxide oxidizer: BAQUACIL Oxidizer or Pool Elegance Shock.
SALTWATER?
Not together.
A salt system makes chlorine, and both labels call chlorine incompatible. Their start-up directions also say to stop using electrochlorinators and ionizers.
MY HOT TUB?
Not this jug.
Both pool sanitizer labels say: don’t use in freestanding spas or hot tubs. Ask us about hot tub options.
DRAIN TO SWITCH?
Usually not.
BAQUACIL says you can convert in as little as 24 hours without draining. You do have to neutralize the chlorine first.
SWIM WHEN?
Fifteen minutes.
After the weekly CDX, BAQUACIL says to wait 15 minutes so it’s fully dispersed.
MIX BRANDS?
Pick a lane.
BAQUACIL marks its core products “Compatible with BAQUACIL pools only.” Choose one system and follow its routine.
This is Pool School education, not the product label and not a price list. Every range and dose above comes from the manufacturers’ own materials and EPA-accepted labels.
EPA-accepted label, Pool Elegance Sanitizer (EPA Reg. No. 3432-83), N. Jonas & Co., Inc.: PHMB 20%; WARNING; sanitizer and algistat, not a disinfectant; incompatible with chlorine; converting from chlorine; start-up pH 7.0–7.8; 50 ppm at ½ gal per 10,000 gal; weekly checks; 1 pint per 10,000 gal per 10 ppm; never below 30 ppm; detergent and copper-algaecide caution; not for freestanding spas or hot tubs.
BAQUACIL CDX Pool Care & Water Testing Guide: system overview, start-up and conversion steps and doses, water balance, weekly maintenance, housekeeping, filter cleaning, troubleshooting, safety, and test strips.
Manufacturer sources checked November 13, 2026 (America/Chicago). Where BAQUACIL’s own materials differ (for example, a 40 ppm floor in the Care Guide versus 30 ppm on the label and website), we show the Care Guide figure and note the label. BAQUACIL product support (per its labels and site): 1-877-929-7945. Emergencies and spills: 1-800-654-6911. Product photos: official BAQUACIL images from baquacil.com and the official Pool Elegance sell sheet from njonas.com. Ryan portrait supplied by The Fin. Pull quote authored for this page. No prices or retailer claims included. BAQUACIL® and CDX® are trademarks of Innovative Water Care, LLC or its affiliates.
Thinking about ditching chlorine, or already on biguanide and fighting the fog?