The Fin pool, spa & hot tubs, Tulsa OK The Fin Get a quote

HOT TUB BUYER’S GUIDE · LEARNING WITH THE FIN

How to choose a hot tub. Without getting in over your head.

Buying a hot tub should feel like the first soak: warm, easy and a little bit smug. Instead, most people get buried in jet counts, amp ratings and model numbers. So here’s the short version from a guy who sells, delivers and services these things in Tulsa. We carry two brands, American Whirlpool and Generation, and I’ll show you how they compare, what to ask, and what really matters when it’s 30 degrees out and you’re standing there in a towel.

  • 🪑 Seats & size
  • 💪 Jets & therapy
  • 🔌 110V vs 240V
  • ❄️ Oklahoma winters
Ryan Musch of The Fin standing by a backyard pool in a black suit and tie with sunglasses, swim goggles around his neck, orange arm floaties and a googly-eyed fish floatie, holding a pool brush pole, owner of The Fin in Tulsa
By Ryan Musch Director of Liquid Affairs, The Fin Professional tub tester 🛁

“Buy the hot tub you’ll use on a cold Tuesday in January, not the one that looks best in July.”

Ryan, Director of Liquid Affairs

① SEATS & SIZE

Count the people. Then count the people who’ll “just stop by.”

Start with who soaks on a normal night, not who shows up for the Fourth of July. A couple who wants quiet time can be very happy in a two- or three-seater. A family of five that likes company needs room to stretch without playing footsie with the neighbors.

Next, pick your seat style. A lounger lets one person lie back with jets from shoulders to feet. It’s heaven for one, but it uses up room that could seat more people. No lounger means more upright seats and more room for a crowd. There’s no wrong answer, only the one that fits your household.

Then check the footprint and the weight. Water weighs just over 8 pounds a gallon, so a full tub with people in it gets heavy fast. That matters for your base, which I’ll cover in section ⑦.

  • 2 to 9seats across American Whirlpool hot tubs, from the 2-seat 101 to the 8–9 seat 982
  • 3 to 6seats across Generation hot tubs, from the 3-person Alpha models to the 5–6 person tubs
  • 139 to 714gallons of water, from the smallest to the biggest tub we carry (American Whirlpool 101 and 982)

Try before you buy: schedule an appointment. Book a time to dry-sit or wet-test a tub, and I’ll have the right models ready for you. Just send us a message. On a dry sit, you kick off your shoes and climb into empty tubs to check the fit. Do your feet reach the footwell? Does the headrest hit your neck? Is the person next to you a little too close? On a wet test, you bring a swimsuit and we have a tub warmed up for you: a real soak in a filled, heated tub with the jets running, so you can feel the massage before you buy. I can get any model in either lineup, but not every one lives on the showroom floor, so tell me which tub you have your eye on when you book.

Top view of the American Whirlpool 982 hot tub shell, a long rectangular tub with two loungers and many seats
Go big: the American Whirlpool 982 is 91″ × 133″ and seats 8–9. Image: American Whirlpool.

② JETS & THERAPY

More jets aren’t always better. Better jets are better.

Top view of the American Whirlpool 471 hot tub shell with a lounger, corner seats and a large footwell jet
The American Whirlpool 471: 49 jets, seats 6, and the brand calls it its most popular hot tub. Image: American Whirlpool.

Jet counts make great sticker headlines. But even American Whirlpool says it plainly: more jets don’t necessarily mean a more effective massage. What matters is where the jets sit, how big they are and how much pump is pushing them.

When you dry-sit or wet-test a tub, ask these questions:

  1. Where do I hurt? Neck, lower back, calves or feet? Find a seat that aims at your trouble spot.
  2. How many pumps? Pumps push the water through the jets. The spec sheet lists them, and the bigger, jet-heavy tubs usually have two or more.
  3. Is there a footwell jet? Your feet carry you all day. They deserve a turn.
  4. Can I control it simply? Some people love dials and diverters. Some people want one button that says “ahh.”

American Whirlpool builds its seats around what it calls Physician Designed Zone Therapy®, with neck-massaging Comfort Collars® and Foot Relief Zones® on many models. Generation keeps things simple: its Signature Series tubs run two 2-speed pumps and 43 to 45 jets in the 5–6 person models, plus a waterfall.

A hot tub is for relaxing, not a medical treatment. Both brands’ manuals say never to soak above 104°F. If you’re pregnant or have a health condition, check with your doctor before you soak.

③ 110V PLUG-AND-PLAY VS 240V

Plug it in or wire it up? Here’s the shocking truth.

Some smaller tubs can run on regular 120-volt household power (you’ll see it sold as 110V or “plug-and-play”). Everything else needs a 240-volt circuit from a licensed electrician. Here’s the trade-off.

PLUG-AND-PLAY

110V / 120 volts

  • A simpler electrical job: it runs on a 120-volt circuit instead of a 240-volt one
  • Great for smaller tubs, patios and first-time owners
  • Slower to heat. Generation’s manual estimates about 2–3°F an hour on 120 volts
  • On a 15-amp hookup, both brands’ manuals say the heater only runs while the jet pump is on low. Crank the jets to high and the heater takes a break
  • Still needs its own dedicated, GFCI-protected circuit. Never use an extension cord

Our 110V-capable models: American Whirlpool 101, 151 and 160 (they ship set for 240V and can be converted to 120V), and Generation Alpha 1, GH500 and GH550.

TRADITIONAL

240V / hardwired

  • Faster heating. Generation’s manual estimates about 4–7°F an hour for one-pump tubs and 6–9°F for two-pump tubs
  • With a full-size 240V circuit, the heater can keep working while you use the jets, so the water stays hot while you soak
  • Generation recommends 240V on any tub that can take it, to get the most out of the heater
  • Needs a licensed electrician and a dedicated circuit. Depending on the model, that’s 30 to 60 amps
  • Needs a shut-off switch within sight of the tub and at least 5 feet from the water

Every other hot tub we carry is a 240V tub, including all American Whirlpool 200, 400, 800 and 900 Series models, the 171, and the Generation Signature Series.

My take: if your home can handle a 240V circuit, it’s usually worth it, especially for Oklahoma winters. If you’re working with a small space or a budget, a 110V tub is a great way to get in the water. Either way, have a licensed electrician check your panel before delivery day.

Top view of the American Whirlpool 160 hot tub shell, a square tub with a bench seat
AW 160: seats 4, 16 jets. 120V or 240V.
Top view of the Generation GH500 hot tub shell with five seats
Generation GH500: seats 5–6, 29 jets. 110V or 220V.
Top view of the Generation Boomer hot tub shell with corner seats and a central footwell
Generation Boomer: 44 jets, two 2-speed pumps. 240V.
Top view of the American Whirlpool 151 hot tub shell with a lounger and two seats
AW 151: seats 3, 20 jets, with a lounger. 120V or 240V.

④ ENERGY & OKLAHOMA WINTERS

What it costs to stay hot when it’s not.

People relaxing in a steaming American Whirlpool swim spa surrounded by snow
Image: American Whirlpool

I won’t throw out a monthly dollar figure, because I can’t make an honest one without knowing your tub, your spot and your electric rate. What I can tell you is what moves the number.

Insulation

This is the big one. American Whirlpool’s Northern Exposure® system uses a reflective copper lining, a 3M Thinsulate™ wrap and BlueMAAX® insulation, backed by a lifetime insulation warranty. Ask any brand how its tub is insulated and what the warranty says.

The cover

The cover is the lid on your heat. A thick, tight-fitting cover that stays strapped down is your best friend in January. A waterlogged, saggy cover is not.

Wind

Oklahoma wind steals heat from an open tub and from a cover that doesn’t seal. A spot near the house, a fence or a privacy screen helps.

Your temperature setting

Every degree you set it higher takes more energy to hold. American Whirlpool’s controls include economy modes that drop the set point by 20°F by default when you’re away or during peak hours.

240V vs 110V

A 240V tub can heat while the jets run. Generation recommends 240V on any tub that supports it, to get the most from the heater.

How you soak

How often you soak, how long the cover is off and your electric rate all add up. Short, frequent soaks with the cover back on fast are the efficient way to go.

Don’t drain it for winter. Both brands say the same thing: you can’t get all the water out of the plumbing, so leave the tub running through cold weather. Generation also notes that freeze damage isn’t a covered repair. After a power outage, check that your tub is running again. Snow on the way? American Whirlpool suggests a simple plywood cap to protect the cover.

⑤ AMERICAN WHIRLPOOL VS GENERATION

Two brands. Two different ways to relax.

We picked these two lines because they cover a lot of ground between them, and because we can service both right here in Tulsa. I can order any model in either lineup. Not all of them fit on the showroom floor at once, so text or email ahead if you want to try a specific one. Here’s the honest rundown.

An American Whirlpool hot tub with a dark cabinet, glowing blue at night

BUILT BY MAAX SPAS

American Whirlpool

The deep bench: 22 hot tubs in five series, plus swim spas. Built for therapy and built to be fixed.

  • 100 Series101 · 151 · 160 · 1712 to 6 seats, 15 to 40 jets. The 101, 151 and 160 can run on 120V.
  • 200 Series250 · 261 · 270 · 271 · 280 · 281 · 2822 to 8 seats, 22 to 46 jets. Lots of shapes, including a rectangle (250) and a corner tub (261).
  • 400 Series451 · 460 · 461 · 470 · 471 · 472 · 480 · 4813 to 6 seats, 29 to 53 jets. Home of the 471, the brand’s most popular tub.
  • 800 Series880 · 8815 to 7 seats, 64 jets and three pumps.
  • 900 Series9828 to 9 seats, 79 jets, four pumps and two loungers.
  • Steel frame with a lifetime steel structure warranty
  • “Appliance Grade” design that can be serviced back to factory spec in your backyard
  • Northern Exposure® insulation with a lifetime insulation warranty
  • Zone Therapy® seating, Comfort Collars® and CleanZone® water care options

Pricing depends on the model and options. Ask me for a quote on the one you like, or browse every American Whirlpool model →

The Generation Hot Tubs sign and logo on the company building in McMinnville, Tennessee

FAMILY-OWNED · McMINNVILLE, TENNESSEE

Generation

Simple on purpose: nine hot tubs in two series, plus swim spas. Founded in 2023 by Kevin and Dawn Sparks to make a hot tub families can afford.

  • Classic SeriesAlpha 1 · GH500 · GH5503 to 6 seats, 25 to 29 jets. All three can run on 110V or 220V.
  • Signature SeriesAlpha 2 · Silent · Boomer · Millennial · Gen X · Gen ZThe 5–6 person models have 43 to 45 jets, two 2-speed pumps and a waterfall. The 3-person Alpha 2 rounds out the series.
  • Made in the USA, with Balboa electrical equipment and a digital topside control
  • A 5″ LED light and an ABS bottom on every model
  • Five shell colors and two cabinet colors
  • Warranty: 10 years on shell structure, 3 years on surface, plumbing and electrical equipment, 1 year on other parts

Generation hot tubs start at $8,500. Ask me for a quote on the model you like. Browse every Generation model →

So which one? If you want the widest choice of sizes, seat layouts and therapy features, start with American Whirlpool. If you want a straightforward, family-sized tub with fewer bells and whistles, look at Generation. Not sure? Schedule a wet test in one of each (just send us a message to set it up). Your back will tell you.

⑥ COVERS, STEPS & ACCESSORIES

The extras. Some are must-haves.

A good cover (must-have)

It holds in heat, keeps out leaves and keeps kids out when it’s strapped down. American Whirlpool’s WeatherShield™ cover has a copper lining and removable pillows you can pull out to vent heat in summer. Generation’s spec sheets list a black cover. And please, nobody stands on the cover.

Steps (must-have)

Hot tubs are tall, and wet feet are slippery. A sturdy step makes getting in and out safer for everyone, especially kids and grandparents.

Cover lift

It lets one person open the tub without a wrestling match. Generation notes a side-mount lift needs about 24″ of extra room on the side where the cover rests.

Water care helpers

Ozone is an option on Generation tubs. American Whirlpool offers CleanZone® systems, including CleanZone® Ultra, which pairs UVC light with ozone. These help, but you still test the water and add sanitizer.

Fun stuff

Bluetooth stereo, LED lighting and lit cup holders are available on many models. None of it is required. All of it is enjoyable.

A starter chemical kit

Test strips, sanitizer and pH balancers. We stock what you need.

Cutaway illustration of a black American Whirlpool WeatherShield hot tub cover showing its foam core and copper-colored lining
Inside a WeatherShield™ cover: a foam core with a copper lining. Image: American Whirlpool.

⑦ PLACEMENT & THE BASE

Location, location, level ground.

A filled hot tub with people in it can weigh several tons. American Whirlpool lists filled weights from about 1,600 pounds (the 101) to about 7,400 pounds (the 982), before anyone climbs in. So the base is not the place to cut corners.

  1. Use a flat, level concrete pad. Generation requires a completely flat, reinforced concrete surface 3 to 4 inches thick. For outdoor installs, American Whirlpool recommends a concrete pad 8 feet × 8 feet × 4 inches. Either way, the whole bottom of the tub has to be evenly supported, or you risk damage and your warranty.
  2. Thinking about a deck? Get a structural pro to sign off first. Generation says the surface must handle at least 100 pounds per square foot.
  3. Leave room to work. Both brands want access to all four sides for service. Don’t box the tub in or sink it below the deck.
  4. Think about the path. A short trip from the back door matters a lot more in January. So do a view you like, some shelter from the wind and distance from messy trees.
  5. Plan the power. Your electrician needs a route to the tub and a spot for the shut-off switch, within sight and at least 5 feet from the water.
  6. Check local rules. Fencing, gates and electrical codes vary, and so do HOAs. A locking cover is part of keeping kids safe.
Close-up of the black one-piece ABS sealed base on the bottom edge of an American Whirlpool hot tub
American Whirlpool’s sealed ABS base seals the bottom of the tub, but it still needs a flat, level surface under it. Image: American Whirlpool.

⑧ DELIVERY DAY

The big day. Here’s how it goes.

Before we show up, you’ll handle:

  1. The padPoured or built, flat and level, and ready for weight.
  2. The electricalYour electrician runs the circuit and the shut-off switch (or the dedicated outlet for a 110V tub).
  3. The pathMeasure every gate and door on the way to the pad. Look up, too, for roof overhangs, power lines and branches. Generation asks for at least 1 foot of clearance on either side of the tub. (Swim spas are bigger still. American Whirlpool recommends placing them by crane.)
  4. The hoseHave a garden hose that reaches the tub. Use regular tap water, not softened water. American Whirlpool says softened water can throw off your water balance and damage parts.

On the day, we’ll handle:

  1. Setting itWe deliver your tub, roll it into place, set it on the pad and make sure it sits right.
  2. Filling and start-upWe fill it, clear any air out of the pumps and balance the water. If it’s 40°F or colder, Generation has installers warm the pumps before start-up, since a little water can be left inside from factory testing.
  3. Your lessonWe teach you the buttons: temperature, jets, filter cycles and lights. Then you ask every question you’ve been saving up.
  4. The waitA tub filled with cold water takes a while to heat. American Whirlpool’s manual says 12 to 14 hours on a 230/240-volt hookup. Keep the cover on and resist the urge to check every 10 minutes. (You will check every 10 minutes.)

One more thing: register your warranty. Generation asks for registration within 30 days of delivery. American Whirlpool has a product registration form on its website. Want help keeping it clean after that? Our Spa Package covers weekly water care.

KEEP LEARNING

More from Pool School.

⑨ SCHEDULE AN APPOINTMENT

Ready to get in hot water?

November is a great time to shop: you’ll be soaking before the coldest nights arrive and before the holidays get busy. Schedule an appointment the showroom to dry-sit a few tubs, or bring a swimsuit for a wet test and we’ll have your favorite warmed up for you. When you book, tell me which models you want to try, who’s soaking, where it’s going and what hurts, and I’ll put together a quote for the right tub.

Schedule an appointment 🐬

Photo of Ryan provided by The Fin. Hot tub product images courtesy of American Whirlpool (MAAX Spas) and Generation Hot Tubs. Stock photo via Unsplash: phoebe lynch. Full credits in CREDITS.txt.