The Fin pool, spa & hot tubs, Tulsa OK The Fin Get a quote

ABOVE-GROUND POOL BUYER’S GUIDE · LEARNING WITH THE FIN

Your first above-ground pool. Let’s keep your head above water.

An above-ground pool is the fastest way to turn a plain backyard into the place everybody wants to be in July. It’s also a big purchase with a lot of small decisions hiding inside it: round or oval, steel or resin, overlap or beaded, sand or cartridge. I sell, install and service these pools in Tulsa, so here’s the guide I wish every first-time buyer read before they started shopping. We carry Doughboy and Embassy pools, and I’ll tell you what matters, what doesn’t and what to ask.

  • 📏 Size & shape
  • 🧱 Walls & liners
  • 🚜 Yard prep
  • 🌪️ Oklahoma-proof
Ryan Musch of The Fin standing by a backyard pool in a black suit and tie with sunglasses, swim goggles around his neck, orange arm floaties and a googly-eyed fish floatie, holding a pool brush pole, owner of The Fin in Tulsa
By Ryan Musch Director of Liquid Affairs, The Fin Dressed for the consult 🤿

“A pool is only as good as the dirt under it. Get the ground right, and the fun takes care of itself.”

Ryan, Director of Liquid Affairs

① SIZE & SHAPE

Round or oval? Let your yard cast the deciding vote.

Before you fall in love with a pool, measure the spot it’s going in. Then remember the pool isn’t the only thing that needs room: the pump and filter, a ladder or steps, room to move around the outside and any deck you’re dreaming about all need space too. Our lineup runs from a 15′ round starter pool up to a 33′ round or a 21′ × 41′ oval, so there’s usually a size that fits.

THE CLASSIC

Round / the crowd favorite

  • Water pushes evenly on the wall all the way around, so a round pool doesn’t need extra side bracing
  • Fewer parts and a simpler install
  • Great for games, floats and lots of kids
  • Takes a square footprint, so it can eat a narrow yard

Best for: square-ish yards, families and first-timers who want the simplest path to the water.

THE LAP-FRIENDLY ONE

Oval / the long game

  • Fits long, narrow yards and side yards much better
  • Longer swimming length for laps (or very dramatic cannonball runways)
  • The straight sides need a support system to hold the water back
  • Some support systems stick out into the yard. Ask how much room yours needs. The ovals we carry use a compact system that shows only about 9″ of support

Best for: narrow lots, lap swimmers and anyone who needs a big pool in a tight yard.

My sizing rule: picture a normal Saturday, not the Fourth of July. Count the people who’ll swim most weekends, then go one size up if your yard and budget allow. Nobody has ever told me their pool was too big. Plenty of people have told me it was too small.

② WALL HEIGHT & DEPTH

How deep is your pool? Shallower than you think.

Above-ground pool walls usually come in heights around 4 to 4½ feet. The pools we carry come in 48″, 52″ and 54″ walls, depending on the model. The water sits a few inches below the top of the wall, so it’s a little shallower than the wall is tall.

  • 48″a lower wall that’s easier to climb in and out of
  • 52″the most common height in our lineup
  • 54″a little more water and a little more privacy

Want more depth? Some liners are made to expand, which lets us dig a deeper swimming area in the middle of the pool. Doughboy only allows this with its 20- or 25-mil expandable liners, and it’s for swimming, not diving. A regular flat-bottom liner means a flat bottom, end of story.

Doughboy’s install manual is blunt about it: the deep area is for underwater swimming only. No diving. No jumping. Even with a deep area, an above-ground pool is never a diving pool.

A round Doughboy above-ground pool with gray patterned walls and white top rails in a landscaped backyard
Round and ready: a Doughboy above-ground pool. Image: Doughboy Pools.

③ WALLS, RAILS & LINERS

Steel, resin or both? What your pool is made of matters.

Every above-ground pool has three main parts: the wall that holds the water back, the frame (the top rails and the uprights, called verticals) that holds the wall in shape, and the vinyl liner that holds the water itself. When a pool is called “steel” or “resin,” it usually means the frame, not the wall.

Steel

The traditional choice. Strong and rigid, with coatings to fight rust. Every pool line we carry uses hot-dipped galvanized steel walls, corrugated for strength. Steel’s one enemy is water that sits on it, so drainage matters (more on that in section ④).

Resin

Resin is a tough plastic used for top rails, verticals and other parts. It won’t rust. Embassy describes its pools as either steel or resin, based on what the top rails and verticals are made of.

Hybrid

The best of both: a steel wall for strength with resin parts where corrosion likes to start. Doughboy describes its steel-and-resin pools as combining heavy-gauge steel strength with corrosion-resistant resin components, for above-ground or semi in-ground installs.

Now the liner. It’s the part you actually touch.

The liner is what holds the water and what your feet feel. Here’s how they differ:

  1. Overlap liners drape over the top of the wall and are held in place with plastic coping. They come in flat-bottom and expandable styles, and they’re common and easy to replace.
  2. Beaded liners have a bead along the top edge that snaps into a track at the top of the wall. The pattern runs all the way to the top for a cleaner, finished look.
  3. J-hook liners (a type of bead) have an edge shaped like a “J” that hooks over the top of the wall.
  4. Thickness is measured in mil, or thousandths of an inch. Doughboy offers 20- and 25-mil liners, and Embassy lists 15-mil virgin vinyl liners. Thicker vinyl is tougher. Heads up: some sellers quote thickness in “gauge,” which isn’t the same as mil. Ask for the mil number.

Your pool’s wall and frame decide which liner style fits, so pick the pool first and the liner second. Already own a pool with a tired liner? We replace those too, for rounds up to 33′ and ovals up to 21′ × 41′.

A round above-ground pool with tan walls and white resin top rails on a lawn, edged with white stone and flowers
Resin rails, steel strength: a Doughboy pool with resin top rails. Image: Doughboy Pools.

④ YOUR YARD & SITE PREP

Location, location, level ground.

A filled pool weighs many tons, and all of that weight sits on your dirt. Doughboy’s install manual says the whole frame must sit on flat ground, within 1 inch of level from one side to the other. That’s why a good install starts with a shovel, not a ladder. Here’s what I look at when I visit your yard:

Level, firm ground

We level to the lowest spot by removing high ground, not by filling low spots, because fill dirt settles. The pool goes on firm, undisturbed soil. Never on concrete, asphalt, gravel, wood or grass.

Sun

Sun warms the water for free. Trees drop leaves and their roots can push up under a liner, so a sunny spot away from trees is the sweet spot. Avoid roof edges, too, so rain doesn’t pour straight into the pool.

Drainage

Rain and sprinkler water should run away from the pool, not pool up around it. Doughboy warns that water settling against the frame and wall leads to corrosion. Keep sprinklers pointed elsewhere, and don’t pile dirt against the outside wall.

Slopes

Doughboy says no sudden slopes within 6 feet of the pool. Too close to the top of a slope and the ground can give way. Too close to the bottom and the hillside can push on the wall.

Power lines & utilities

Never put a pool under overhead power lines. Call to have buried lines marked before anyone digs, and keep clear of underground pipes and cables. The pump needs a nearby outlet installed to code. Under the National Electrical Code, the pump’s outlet must be GFCI-protected and at least 6 feet from the inside of the pool wall. Hire a licensed electrician.

Permits, setbacks & HOA

Rules vary by city and neighborhood. Many cities require a permit, minimum distances from property lines and fencing. Many HOAs have their own rules about where pools can go and what they look like. Check with your city and your HOA before you buy.

One more spot check: pick a place you can see from the house. Doughboy recommends a site that lets you supervise swimmers and spot kids near the pool. Your kitchen window is a lifeguard chair with a sink.

⑤ PUMP & FILTER

The heart and the kidneys. Don’t skimp on either.

The pump moves the water. The filter catches the dirt. They have to be matched to each other and to the number of gallons in your pool, or you get cloudy water and a pump that works way too hard. Every filter is rated for a maximum flow, and we size the whole system to your pool. Then there are three filter types to choose from:

THE WORKHORSE

Sand

Water flows through a tank of special filter sand, which traps dirt.

  • Simple, sturdy and easy to run
  • You clean it by backwashing, which reverses the flow and sends the dirt out a hose
  • A common pairing with above-ground pools. Embassy pools come with sand filters

Best for: easy-going owners who want low fuss.

THE NO-BACKWASH ONE

Cartridge

Water passes through a pleated fabric cartridge.

  • No backwashing, so it doesn’t waste water that way
  • You clean it by pulling the cartridge and hosing it off
  • Cartridges wear out and get replaced over time

Best for: owners who want to save water and don’t mind a hose-down.

THE OVERACHIEVER

D.E.

Diatomaceous earth, a fine powder, coats grids inside the filter and catches tiny particles.

  • The finest filtering of the three
  • You backwash it, then add fresh D.E. powder
  • More upkeep, and the powder needs careful handling. Follow the label

Best for: crystal-clear-water perfectionists.

Ryan’s rule: run your pump a minimum of 16 hours a day during swim season. A filter can’t clean water that isn’t moving through it, and Oklahoma summers are hard on pools. Skimping on run time is the fastest way I know to turn a blue pool green.

⑥ SALT OR CHLORINE

Salt or chlorine? Spoiler: it’s chlorine either way.

A round Embassy above-ground pool with light gray walls and white rails in a fenced backyard with trees
Ready for summer: an Embassy above-ground pool. Image: Embassy Pools.

A saltwater pool uses a salt chlorine generator that turns dissolved salt into chlorine. People love the softer-feeling water and not having to add chlorine by hand. A traditional chlorine pool gets its chlorine from tablets, granules or liquid. It costs less to set up, and it’s simple to manage.

The catch with salt on an above-ground pool: salt is harder on metal. Before you go salty, make sure the pool is approved for a salt system by its manufacturer. We carry a pool line that’s built to run with a salt chlorine generator, and I’ll show you how it works. Want the deep dive? Read our saltwater guide and our guide to the types of chlorine.

Either way, these are the numbers to aim for:

  • 2–4ppm free chlorine
  • 7.2–7.6pH
  • 80–120ppm total alkalinity
  • 200–400ppm calcium hardness
  • 30–50ppm cyanuric acid (60–80 for salt pools)
  • 16+ hrspump run time per day, minimum

Not sure what any of that means? That’s what we’re here for. Send us a message or book an appointment, and we’ll go over exactly what your pool needs. See our water chemistry guide for more.

⑦ LADDERS, STEPS & DECKS

Getting in and out without the flop.

How you get into the pool changes how often you use it. Here are your options:

  1. A-frame ladder. It straddles the wall with steps on both sides. It’s the simplest choice. Look for one that locks or has a removable outside section, so kids can’t climb in when you’re not around.
  2. Steps. Wider, easier treads that are friendlier for kids, grandparents and anyone who doesn’t love ladders. Ask which ladders and steps are made for your pool’s wall height.
  3. A deck. A deck turns an above-ground pool into a backyard hangout, with room for chairs and a place to dry off. Deck access needs a gate (more on that in section ⑧), and a deck may need its own permit, so check with your city.

Thinking about semi in-ground?

A semi in-ground pool is set partway into the ground. It sits lower, looks closer to an in-ground pool and makes decking easier. Not every above-ground pool can be buried, though. Embassy’s Hydrosphere Series is designed to be recessed 24 inches or more, and Doughboy says its pools can only go below grade using its special below-grade instructions. If you want that look, tell me early. And if you’re torn between above-ground and in-ground, we also offer small fiberglass pools and vinyl liner in-ground pools, so I can show you all of your options.

An above-ground pool set partly into the ground beside a wooden deck, with potted plants, gravel and a fenced patio
Partly in the ground, all the way fun: a Doughboy pool installed with a deck. Image: Doughboy Pools.

⑧ SAFETY

The serious section. Please read this one twice.

A gray A-frame ladder on the side of an above-ground pool
Photo: Pieter Claerhout / Unsplash

I’ll keep the jokes out of this part. These guidelines come from the U.S. Consumer Product Safety Commission’s Pool Safely program and from the manufacturers we carry.

Fence it in

The CPSC recommends a barrier at least 4 feet high around a pool. An above-ground pool’s wall can count as part of that barrier, and a deck needs a gate. Gates should be self-closing and self-latching. Your city may require more, so check local code.

Lock or remove the ladder

When the pool isn’t in use, the CPSC says to secure, lock or remove the steps or ladder, or surround them with a barrier. A ladder left in place is an open door for a curious kid.

No diving. Ever.

Above-ground pools are shallow. Doughboy and Embassy both require “No Diving” warning signs on their pools, and Doughboy’s manual says no jumping, either. Leave the signs up.

Watch the water

Always have an adult watching when kids are swimming, without a phone in hand. Embassy’s safety guidelines put adult supervision first on the list.

Learn the basics

Teach kids to swim, and learn CPR. Keep a phone and rescue gear near the pool, and post your safety rules where everyone can see them.

Keep power safe

Use a GFCI-protected outlet for the pump, installed by a licensed electrician. Never run the pump on an extension cord, and keep electrical devices away from the water.

⑨ INSTALL DAY

From bare dirt to cannonballs.

We handle installation, start to finish. Here’s what happens, so nothing surprises you.

  1. The backyard visitI come out, measure the spot, check the slope and drainage, and help you pick a size that fits the yard and the HOA.
  2. Your homeworkGet any permits and HOA approval, have buried utility lines marked, and book a licensed electrician for the pump’s outlet.
  3. Leveling the groundWe remove the grass and level the area to the lowest spot, within 1 inch from one side to the other. This is the most important step of the whole job.
  4. The frame and wallWe set the bottom rails, stand the wall and attach the verticals and top rails, checking that the pool stays round and level as we go.
  5. The cove and floorWe build a cove, a sloped ring around the inside base of the wall that keeps the liner from creeping under it. Doughboy warns not to use materials that shift, like sand, for the cove. Then we smooth and tamp the floor.
  6. The liner and waterThe liner goes in and we start filling. We watch the liner closely as the water rises so it sits smooth, without wrinkles. Then we hook up the pump and filter, start things up and show you how it all works.

Wind delay? Doughboy recommends avoiding windy days during installation. A liner in an Oklahoma gust is a very large kite. If the forecast says blustery, we may move your install day, and you’ll thank us.

⑩ THE OKLAHOMA FACTOR

Heat, wind, red dirt and ice. All in one year.

Oklahoma pools work hard. Here’s how our weather and our dirt change the plan.

Summer heat

Strong sun burns off chlorine fast. Cyanuric acid (stabilizer) helps protect it, which is why we target 30–50 ppm, or 60–80 ppm on salt. Hot, windy days also evaporate water, so check your water level often.

Wind

Our wind blows leaves, dust and debris right into the water. That means more skimming, more filter cleaning and a solid case for running the pump at least 16 hours a day. In the off-season, a cover that’s secured properly matters.

Red clay

A lot of Tulsa-area yards sit on clay that can stay soggy after a storm. That makes drainage planning important. Water that collects around the pool can corrode the frame, so we grade the site so rain runs away from the wall.

Bermuda grass

Bermuda grass is common in Oklahoma lawns. Doughboy says not to install a liner over nut grass or Bermuda grass without special instructions from the dealer. Tell me if you have it, and we’ll plan the prep.

Winter freezes

Water that freezes in your pump, filter and plumbing can crack them. Before the first hard freeze, the pool needs to be winterized: lines cleared, equipment drained and a cover on. Read our winterizing guide to see what’s involved, or let us close it for you.

Don’t empty it

Above-ground pools stay filled through winter. Doughboy says that if you ever drain one, leave at least 12 inches of water in it, and never leave the pool standing without a liner. When in doubt, ask before you pull water out.

⑪ TOTAL COST OF OWNERSHIP

The price tag is just the first splash.

I won’t throw a dollar figure at you here, because an honest number depends on your pool, your yard and your habits. Once we’ve looked at your yard, I’ll give you a written quote. Here’s what to budget for beyond the pool itself, so there are no surprises after the first swim:

  1. Site work and electrical. Leveling, any permits and a licensed electrician for the pump’s outlet.
  2. Chemicals. Sanitizer, stabilizer and pH and alkalinity balancers, plus a test kit. We stock everything you need.
  3. Electricity. Your pump runs at least 16 hours a day in season. Ask about pump options when we size your system.
  4. Water. The first fill, plus top-offs after hot, windy weeks.
  5. Opening and closing. Waking the pool up in spring and winterizing it in fall. Do it yourself, or let us handle it.
  6. Parts and upkeep. Filter sand, cartridges or D.E. powder, the occasional service part and, eventually, a new liner. We carry service parts, and we replace liners too.

Rather spend summer swimming than skimming? Our Above-Ground & Small Pool service takes care of the weekly work, and we offer openings and closings as one-time jobs.

Close-up of clear blue pool water with sunlight shimmering on the surface
The goal: water this clear, all season long. Photo: engin akyurt / Unsplash.

KEEP LEARNING

More from Pool School.

⑫ SCHEDULE A CONSULT

Ready to make a splash?

Schedule an appointment for a pool consult. We’ll talk through sizes, shapes and budgets the showroom, and I’ll plan a visit to look at your yard. When you book, tell me roughly how much space you have, who’s swimming and whether you’re leaning toward round or oval, salt or chlorine. I’ll come prepared with options that fit.

Schedule a consult 🐬

Photo of Ryan provided by The Fin. Pool product images courtesy of Doughboy Pools and Embassy Pools. Stock photos via Unsplash: João Pedro Schmitz, Pieter Claerhout and engin akyurt. Full credits in CREDITS.txt.